What is a plasterboard?

Before you learn about how to USG boral plasterboard your ceiling, it is important to know what exactly it is. Especially if you are someone who hasn’t worked on this kind of a project before, you might not be aware of the fact as to what is actually is. A plasterboard is a preformed sheet of plaster that is fixed together between 2 sheets of paper. The thing to note here is that the material that is used for the traditional plaster walls is the same that is used on plaster boarding a ceiling.

How to fit a plasterboard ceiling step by step

1. Measure your ceiling

The first step that is required for setting up plaster boarding a ceiling is measuring the ceiling. For this, you will be needing length of the room. However, one thing to note here is that the room may not be square in shape which is what could effect the measurements.

2. Make any required cuts to the plasterboard

As mentioned earlier, before cutting the plasterboard sheet, it is important to measure the ceiling first. Then take these measurements to cut the plasterboard by marking the lines on the plaster sheet. Cut the sheet with a kitchen knife. A sufficient amount of pressure is required to cut the plaster sheet.

3. Remove old plaster

If you are removing the old plaster that is already applied on the ceiling, take care of it before you bring in the new one. When you are removing and putting up the new plaster, you have to make sure that everything is in good shape. It is important to see that there is no loose area which would impact the new plaster that would be installed.

To start applying the plasterboard ceiling, you should begin with most level corner you can try the weatherboards. If you can put a full sheet, then you should do the same. However, one should keep in mind that the plasterboard sheet should be cut as per the room length as it may either be too small or too big for the space covered.

To fix the outside edges properly, one should fasten it with a screw for a proper fit. By doing this, you will be able to fix the plasterboard on ceiling rightly. This will result in no bending or breaking, making the whole process of installing a plasterboard easier.